Iced Pour-Over Coffee Recipe: Golden Coffee-to-Water Ratio and Ice Guide
Introduction: Want to quickly brew a well-balanced iced coffee in the summer heat? Mastering the core parameters of iced pour-over makes it easy. This article explains in detail how to precisely control the coffee-to-water ratio, ice amount, and grind size to avoid a thin, weak cup caused by dilution. From the classic three-pour method to the simple single-pour method, both methods include practical parameters to help you recreate café-quality iced pour-over at home.
In midsummer, a refreshing, energizing cup of coffee becomes a necessity. Compared with time-consuming cold brew or equipment-heavy ice drip, iced pour-over wins as the summer choice thanks to its convenience and layered flavor. The key is balancing the dilution effect of the ice with the coffee's strength, maximizing flavor through scientific proportions.

The golden formula for iced pour-over can be simplified as: fine-ground coffee + 10 times hot water + 5 times ice. For example, with 15 grams of coffee, pair it with 150 grams of hot water (about a 1:10 coffee-to-water ratio) and 75 grams of ice (5 times the coffee dose). Testing shows this ratio keeps the coffee at an ideal strength after the ice melts, avoiding an overly weak cup.
Pay special attention to the shortened extraction time—reducing the hot water volume shortens the whole process from the usual 2 minutes to about 1 minute 20 seconds, leading to insufficient extraction of flavor compounds in the later stage. The solution is to adjust the grind 0.5–1 setting finer (for example, an EK43s grinder from 10 to 9–9.5), slowing the water flow to extend the time to 1 minute 50 seconds and promote full release of aromatic compounds.

Grind setting adjustment tips:
• Electric grinder (such as EK43s): reduce the hot-brew setting by 1–1.5 (e.g., hot brew 10 → iced brew 9)
• Hand grinder (such as C40): reduce by 2–3 clicks (e.g., hot brew 24 → iced brew 22)
This range effectively balances strength and extraction efficiency; grinding too fine easily causes channeling.

Using a medium-light roasted Tanzanian Kilimanjaro bean as an example:
• Coffee dose 15 g | Hot water 150 g (93°C)
• Ice 75 g | Grind: EK43s setting 9 (85% passing a No. 20 sieve)
Use a three-pour method:
1. Pour 30 g in a small stream down the center and bloom for 30 seconds
2. Pour 60 g in circles in the same direction
3. Pour the final 60 g until dripping is complete
Keep the total time to 1 minute 50 seconds–2 minutes; the result is light-bodied with the acidity of green grapes and berries.


The advanced single-pour iced pour-over is better suited to beginners:
• Tool: a slow-flow cone dripper (such as the Mugen dripper)
• Parameters: 20 g coffee + 150 g water + 80 g ice (placed in the server in advance)
• Extraction: pour the hot water in a large stream within 10 seconds, stir 10 circles in one direction with a spoon
• Time: dripping completes in about 1 minute 43 seconds
This method lowers the barrier to entry; the coffee is round and mellow with a cinnamon and peach finish.

Practical tips:
1. Use purified water for ice to avoid off-flavors
2. When stirring, keep circling evenly in the same direction
3. Pre-chill the sharing pitcher to enhance the cooling effect
4. If the flavor is too strong, add 1–2 ice cubes to adjust

Both methods are proven effective: the classic three-pour method suits connoisseurs seeking layering, while the single-pour method meets the need for speed. Fine-tune the parameters to the bean's characteristics (for dark roasts, raise the water temperature slightly to 95°C), and you can consistently produce high-quality iced pour-over.

