Hawaii Coffee Bean Grades Explained: What Grade Is No. 3?
Introduction: Hawaii coffee beans have a strict grading system, with five grades ranging from Extra Fancy to Prime. Understanding these grades not only helps you select high-quality coffee beans, but also explains why only certain grades can carry the name 'Kona.' This article details the key parameters of each Hawaii coffee bean grade, including screen size and defect rate standards, and focuses on which grade the often-mentioned 'Hawaii No. 3' belongs to, so you won't be confused when buying.
The quality grading of Hawaii coffee beans is set by the Hawaii Department of Agriculture and is divided into five standard grades. These grade classifications are directly related to coffee origin certifications (such as the famous Kona coffee), but note that not all grades of coffee can be called 'Kona certified coffee.'
The highest grade is Hawaii Extra Fancy. This type of coffee bean is required to come from a single origin and have a screen size of at least 19. In a 300-gram sample, no more than 8 defective beans are allowed, making it the grade with the strictest quality requirements.
Compared with Extra Fancy, Hawaii Fancy has a slightly smaller screen size of 18, but its requirements in other respects are similar. However, the number of defective beans allowed in a 300-gram sample is relaxed to 12, making it suitable for consumers with slightly looser flavor requirements who still seek a certain level of quality.
Next is Hawaii No. 1, whose screen size is further reduced to 16, one of the top classifications with the lowest screen requirements among the five grades. Although the size requirement is not high, the number of defective beans allowed in a 300-gram sample is 18, more than Extra Fancy and Fancy, making it suitable for coffee lovers with a slightly limited budget who still hope for higher quality.

Hawaii Select is characterized by not mandating a screen size, but it has higher requirements for flavor performance. After brewing, coffee beans of this grade should not exhibit musty, medicinal, fermented, excessively sour or astringent, or other unpleasant flavors. In addition, a maximum of 5% of coffee beans may have defects, of which no more than 2% may have obvious off-flavors, sourness, blackness, or mold characteristics.
Hawaii Prime is slightly more relaxed in quality control than Select, allowing up to 15% of coffee beans to contain defects. However, it likewise limits the proportion of beans with bad flavors, with off-flavor, sour, black, or moldy coffee beans not exceeding 5%. This grade is suitable for daily drinking and offers relatively good value.
Finally, Hawaii No. 3 is the lowest quality category among the five grades. This grade allows up to 35% of coffee beans to contain defects, but off-flavor, moldy, sour, or black beans must still be kept within 5%. It is worth noting that Hawaii No. 3 coffee beans are not allowed to be labeled with a specific origin name and are typically used to make commercial coffee or low-priced blended bean products.
In summary, if you seek a specialty coffee experience with pure flavor and very few defects, choose Extra Fancy or Fancy. If you value value for money more, No. 1 and Select are both good choices. No. 3 is better suited to cost-sensitive, more ordinary consumption scenarios. Understanding these grades will help you make a wiser decision when purchasing Hawaii coffee beans.